PowerLite 822p Multimedia Projector

Selected FAQ

Q:
What should I do if I see the message No Signal?
A:
The projector has an on-screen help system you can use to solve this problem; see Using On-Screen Help. If the on-screen help does not solve the problem, check the following:
  • Make sure the cables are correctly connected. See Setting Up the Projector.

  • Try restarting your computer.


  • Make sure the power to your computer or video equipment is turned on.


  • If you’ve connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the remote control to select the image source. Allow a few seconds for the projector to sync up after pressing the button.


  • If you’ve connected a laptop computer, make sure it’s set to display on an external monitor.

    If you’re using a PC notebook:

    • Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s manual or online help for details.

      On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time.


    • Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.

      From the Control Panel, open the Display utility. Click the Settings tab, then click Advanced. The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. See your computerís documentation or online help for details.


    If you’re using Macintosh OS X:

    1. Open System Preferences.


    2. Click Display or Displays.


    3. Make sure the VGA Display or Color LCD dialog box is selected.


    4. Click the Arrangement or Arrange tab.


    5. Make sure the Mirror Displays checkbox is selected.
Published: April 25, 2007

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page