PowerLite Home Cinema 1080 Projector

Support Links
PowerLite Home Cinema 1080 Projector Support Drivers & Downloads FAQs for this Product Manuals Contact Support
Quick Links
More on this Product Register Your Product User Replaceable Parts Epson Recycling Program
Weekly Specials from EpsonStore.com
Selected FAQ

Q:
Why does the image/picture have a blue cast or haze when I connect my video equipment (DVD player, satellite receiver, etc.) to the projector using a component video cable?
A:
The problem could be caused by the connection or configuration of your video equipment. Check the following:

  • Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.


  • Make sure the projector’s Input Signal setting is set correctly to match the output signal of your connected video equipment.


  • Make sure the connected video equipment is set up to output video to component video.
Published: March 8, 2007

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page
Sign up for exclusive deals & offers
Thank you for signing up!

Keep an eye out for our great offers and updates.

Oops, it looks like the system is down. Please try again later.

Stay in the loop with Epson email notifications

Sign Up Now