Epson Stylus C120 Ink Jet Printer

Selected FAQ

Q:
The colors in the image on my monitor do not match the output from my printer. What's wrong?
A:
Your monitor and the printer use different technologies to represent colors, so your printed colors can't match your screen colors exactly. Try increasing your monitor’s color palette to view a greater range of colors, and then try the following:

  • Make sure your printer software is not set to use black ink only.


  • The print head nozzles may need cleaning.


  • The ink cartridges may be old or low on ink, and you may need to replace them.


  • Try turning off PhotoEnhance in the Windows printer software.


  • On a Macintosh, try using Automatic mode.


  • Try changing the Gamma setting in your printer software.


  • Use a color management system. Try using the ICM (Windows) or ColorSync (Macintosh) setting.


  • For best results, use genuine Epson ink and paper.


  • After you print, the colors on your printout will take some time to set as the ink dries. During this time, the colors may look different than you expect. To reduce the drying time, avoid stacking your prints on top of each other.
Published: August 2, 2007

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page