Epson Stylus Pro 7880 ColorBurst

Selected FAQ

Since I upgraded to Macintosh OS X 10.5 (Leopard), some printer driver options are missing. What should I do?
Make sure you’re not using the Macintosh OS X 10.5 Gutenprint driver. Follow these steps to check if you’re using the Gutenprint driver and change it if necessary:
  1. From the Apple menu, select System Preferences.

  2. Click Print & Fax.

  3. If necessary, click once on your printer’s name in the Printer list. (You don’t need to do this if only one printer driver is installed).

  4. If you see Gutenprint next to your printer name, go to step 5 to change the driver. (The Stylus Pro11880 appears in the example below, but you’ll see your printer name instead).

  5. If you see only your printer’s name, you’re using the correct driver, and you can skip the remaining steps.

  6. Turn off the printer.

  7. Click the button to remove the printer from the Printers list, then click OK.

  8. Go to the Macintosh Leopard Support page and select your printer from the appropriate list. You’ll see an option to download the Macintosh OS X 10.5 driver.

  9. Click Download Now to download the driver and follow the on-screen instructions to install the driver.

  10. From the Apple menu, select System Preferences. If necessary, click Print & Fax.

  11. Turn on the printer. Your computer should add the printer automatically.

  12. If your computer does not add the printer or if it adds the Gutenprint driver again, contact Apple for assistance. You may need to reinstall the Epson drivers provided with Macintosh OS X 10.5.

    Note: To check ink levels, click the Utility button, then click EPSON StatusMonitor. The Supply Levels button will not show remaining ink levels for your Epson printer.
Published: November 20, 2007

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page