PowerLite Home Cinema 720 Projector

Selected FAQ

How do I install the USB Display on my projector?
Follow these steps:

  1. Press the Menu button on the projector, open the Extended menu, select USB Type B, and then select USB Display to enable it.

  2. Make sure the square end of the USB cable is securely connected to the projector's USB Port B, and the flat end of the USB cable is connected to the laptop/desktop Type B USB port. When the USB cable is connected, the projector is listed as a driver letter under "My Computer," as shown below:

  3. If the following message appears, click Continue to remove an older version of the USB Display.

  4. Click the Agree button.

  5. The USB display screen should appear at the end of the driver installation. If not, click the Source Search button on the projector or the remote control to toggle to USB Display.
Published: April 29, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page