PowerLite 6110i Multimedia Projector

Selected FAQ

The message Not Supported is displayed. What’s wrong?
Try the following:
  • Make sure your computer’s resolution doesn’t exceed UXGA (1600 x 1200) and the refresh rate is supported by the projector. See Connecting to a Computer.

  • Make sure the correct Input Signal is selected in the Signal menu. It should normally be set to Auto, unless you are using a 60-Hz PAL system (select PAL60). See Adjusting the Input Signal.
Published: February 15, 2008

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page