PowerLite Pro Cinema 1080 UB Projector

Selected FAQ

What should I do if I see static or noise in the image?
Check the following:

  • Make sure the Input Signal is set correctly for your connected video equipment. See Other Setup Options.

  • If you’re viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting. See Sharpness and Picture Quality Settings.

  • Make sure your cables are securely connected at both ends.

  • If you’re using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.

  • If you’re displaying the same image on your laptop computer and projector screen, try turning off your laptop’s LCD display.

  • If you’re using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced.

  • If you’re using a computer, keep your computer and video cables separated from the power cord as much as possible to prevent interference.

  • Select the correct resolution. See Compatible Video Formats.

  • If you’re projecting from a DVD player, or other video source, make sure the correct output signal is selected on the device.
Published: January 23, 2008

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page