Epson Stylus NX510 All-in-One Printer

Selected FAQ

Q:
What information do I need to know before I install the Epson Stylus on my wireless network?
A:
You’ll need to know the following:

  • Network name (SSID)

  • (This is the name of the wireless network that is set up on your router or access point.)

  • WEP key or WPA passphrase

  • (This is the network security password.)
This information is stored in your network’s router, and may have been entered when the router was first set up. If you don’t have this information, contact the person who set up your network before you begin. You may also be able to log onto the router from your computer and check its setup screens. See your router’s instruction manual for details.

Note:
The network name and security key or passphrase are case sensitive. Be sure to correctly note uppercase, lowercase, and numeric/special letters.

The printer supports the following wireless security modes: WEP 64, WEP 128, WPA-PSK, and WPA2-PSK.
Published: June 10, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page