I've tried to install the product's software for a wireless connection, but cannot complete the installation. What should I do?
Try the following solutions:
Make sure you know your network's security settings before you set up your product on your wireless network. Epson will not be able to provide this information for you. If you donít know this information, youíll need to contact the manufacturer of your router
or the person who set up your network.
If you know your security settings, continue with these steps:
- Turn your router off and back on. Warning: If your router is connected to other devices, you may need to re-establish the connection for the other devices on the network.
- Set up the product for a wireless connection.
Note: If you see a firewall alert message when you install the software, make sure you click Unblock or Allow to let EpsonNet Setup continue. Warning: Do not select Ask Me Later, Keep Blocking, or Block.
All network communication must pass through the firewall, and only those permitted access will be able to access your network through the firewall.
Close all applications (including any screen savers, virus protectors, and firewall software) before you install the software.
- Uninstall the printer software, then reinstall the printer software.
If the steps above do not help, check the additional troubleshooting tips below, then try steps 1 through 4 again.
Uninstalling Product Software - Mac OS X
Uninstalling Printing Software - Windows
- If your wireless router or access point is set to not broadcast its Network name (SSID), you'll need to enter the SSID manually in the printer's setup software. If your wireless router or access point has wireless security enabled, you'll also need to know what kind of security it is using. Epson will not be able to provide this information to you. If you don't know this information, you'll need to contact the manufacturer of your router or the person who set up your network.
- Make sure the product is within range of the wireless router or wireless access point.
- Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or large metal objects such as a filing cabinet.
- If you enabled access restrictions (such as MAC address filtering) on the wireless router or access point, disable the restrictions. If your unsure on how to do this, contact the manufacturer of your router for instructions.
- Disable any settings (such as AP Isolation, Client Isolation, or Privacy Separator) on your wireless router or access point that would prevent wireless devices from communicating with each other.
Published: September 9, 2011
Return to Main FAQs Page