Epson Stylus NX330 Small-in-One™ All-in-One Printer

Selected FAQ

What should I do if I'm having paper feed problems?
See the solutions below for your type of paper feed problem.

Paper Feeding Problems

  • Do not load more than the recommended number of sheets.

  • If paper does not feed for printing, remove it from the sheet feeder. Reload it against the right side, then adjust the edge guide.

  • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.

  • If paper jams when you print on both sides of the paper, try loading fewer sheets.

  • For best results, follow these guidelines:

    • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.

    • Do not load paper with holes punched in it.

    • Follow any special loading instructions that came with the paper.
Paper Ejection Problems

  • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint.

  • If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint.
Paper Jam Problems

If you have problems with paper jams, try these solutions:
  • Cancel the print job from your computer, if necessary.

  • Gently pull out any jammed paper from the output tray and sheet feeder.

  • Press the start button to resume printing. If the product messages still show an error, continue with the next step.

  • Press the power button to turn the product off.

  • Lift up the scanner unit, and remove the jammed paper and any torn pieces.

  • Lower the scanner unit and press the power button to turn the product back on.

  • Carefully follow all paper loading instructions when you load new paper.

  • Related References
    Solving Paper Problems
    Cancelling Printing Using a Product Button
    Paper or Media Type Settings
    Loading Paper
Published: November 9, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page