No image appears. What should I do?

• Check the following:
  • Make sure Epson MovieMate is turned on (the   light is green and not flashing). If the light is flashing green, wait for Epson MovieMate to warm up.
  • Make sure the lens cover slide is open.
  • Make sure the region code on the DVD is 1.
  • Check the  lamp warning light. If it is flashing orange or red, you need to replace the lamp. For instructions see Replacing the Lamp.
  • The Screensaver feature turns off the picture if a still image is projected for more than 15 minutes. See Saving Power for instructions on adjusting Sleep settings.
  • If you're using external video equipment, check the following:
  • Make sure the external video equipment is turned on, connected, and set up correctly.
  • Press the  button on Epson MovieMate or remote control.
  • Press the  or Play button on the external equipment.
  • Make sure you don't have cables connected to more than one video port. You can use only one connection at a time. See Viewing Video from External Devices for more information.