Replacing Ink (Part 2)
 |
Remove the new ink cartridge from its protective bag. Next, remove only the yellow
tape seal from the cartridge. |
 |
 |
Caution: |
|
|
 | You must remove the yellow tape seal from the cartridge before
installing it, otherwise the cartridge will become unusable. |
|
|
|
| Do not remove the blue or white portion of the tape seal from the
top of the cartridge; otherwise, the print head may become clogged and will be unable to
print. |
|
|
|
| Do not remove the tape seal from the bottom of the cartridge;
otherwise, ink will leak. |
|
 |
Place the ink cartridge gently into the cartridge holder with the label on the
cartridge facing up. Do not press down on the cartridge itself. Press the ink cartridge
clamp down until it locks in place. |
|
|
Caution: |
|
|
Once you install the ink cartridges, do not open their clamps
again until you replace the cartridges. Otherwise, the cartridges will become unusable. |
 |
Press the 
cleaning button. The printer moves the print head and begins charging the ink delivery
system. This process takes between one and two minutes to complete. When the ink charging
process is finished, the printer returns the print head to its home position and the  power light stops flashing. |
|
|
Caution: |
|
|
The power light
continues to flash while the printer performs the ink charging operation. Never turn off
the printer while this light is flashing. Doing so can result in incomplete charging of
ink. |
 |
Close the printer cover. |
|
