10x10_spacer.gif (822 bytes)  
 

WebTV Printer Help Guide
Previous Page
Home
Help Glossary

 

Start Here (part 3)

4. Connect the Printer to Your WebTV Console

  1. Make sure the printer and your WebTV console are turned off.
  2. Connect the parallel cable to the printer’s parallel connector on the back of the printer; then squeeze the wire clips together to lock it in place. If your parallel cable has a grounding wire, attach it to the back of the printer also.
    10x10_spacer.gif (822 bytes)
    10x10_spacer.gif (822 bytes)cable_attaching(14645 bytes)
    10x10_spacer.gif (822 bytes)
  3. Connect the other end of the cable to your console’s printer port and secure it as necessary.

5. Load Paper

  1. Pull out the output tray extensions. Slide the left edge guide so it’s slightly wider than your paper.
    10x10_spacer.gif (822 bytes)
  2. Load your paper with the printable side up (on special or ink jet paper, this side is coated or whiter). Place it against the right edge guide, then slide the left edge guide against the other side.
    10x10_spacer.gif (822 bytes)
    10x10_spacer.gif (822 bytes)
    10x10_spacer.gif (822 bytes)

Go Online, Read the Online Help, and Print

1. Access Your Online WebTV Printer Help

The Start Here card and Printer Basics book that come with your printer are written for Windows and Macintosh users, not WebTV users. To read your WebTV Printer Help, go to the following web page: http://support.epson.com/webtv/. You are reading a section of it now.

2. Print to your Printer

Once online, press the Option button and choose Print to print what’s on the screen. See your WebTV Printer Help guide for more information.

 

Previous PageTop of Page

Copyright © 2001 Epson America, Inc.